Manifolds and Vacuum Fittings for 2016 Ram 2500
NOT Included With Long Block Engine Install Kit. Intake Manifold To Cylinder Head.
68190715AA,AB Supersede To 68190715AC Intake Manifold Kit. Item 3 Ball Stud & Item 4 Bolts Are No Longer Included & Must Be Ordered Seperate. Intake Manifold To Cylinder Heads. M6x1.00x81.00.
Rectangle. Rectangile. System. Square. Large, Small Seal Is Seviced With The Valve Only. NOT Included With Long Block Engine Install Kit or Upper Engine Gasket Kit, Must Order Separate. Small Seal Is Serviced With The Valve Only.
NOT Included With Long Block Engine Install Kit. System. Large O Ring Small O Ring Is Serviced With PCV Valve Only.
Round Pad In Rear Of Intake Manifold Is Serviced With Intake Manifold. Engine Valley. Round Pad In Rear Of Intake Manifold Serviced In Manifold Kit. Valley Cover.
Insulator Cover
Make Up Air Insulator. Inbetween Oil Fill Housing And Fuel Rail.
Hex Flange Head Bolt
M5.74x1.81x21.50. Fuel Rail to Intake Manifold. Bracket To Intake Manifold. Intake Short Runner Valve To Intake Manifold. Intake Short Running Valve Actuator Valve To Intake Manifold.
Right Side. NOT Included With Long Block Engine Install Kit. Important note:pay close attention to up to and after dates and qty and size for bolts and studs.
Nine (9) Hole Type Use Up To 03/05/2018. Left Side. Use For 03/05/2018 And After. Use For 03/05/2018 And Later.
Nine (9) Hole Type Use Up To 03/05/2018. Left Side. Use For 03/05/2018 And After. Use For 03/05/2018 And Later.
Flange Attachment. Screw to Manifold. Front Exhaust Pipe To Exhaust Manifolds. [.375-16]. Exhaust Pipe to Converter. Mega Cab. Converter to Manifold. Y-Pipe to Exhaust. Quad Cab. Regular Cab.
.375-16x2.50. Front Exhaust Pipe To Exhaust Manifold.
Use Up To 06/04/2018. Right And Left Side. Gasoline Engine Manifold Only.
Side. Use Up To 06/04/2018. M8x1.25xm6x1x75.50. Exhaust Manifold To Cylibder Head.
M8x1.25xm6x1.00x73.00. Side. M8x1.25xm6x1.00x75.50. Use Up To 06/04/2018. Corner. Exhaust Manifold To Cylibder Head.
Hex Flange Head Bolt, Mounting
Use For 06/04/2018 And After. M8x1.25x48.50. Side. Use Up To 06/04/2018. Middle. This size bolt is only used for applications that use item 3 and 13 Tie Bars.. Right And Left. Exhaust Manifold To Cylibder Head.